Inline structure over multiple cross sections

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Inline structure over multiple cross sections

Danny
Anyone who can help, please? Is there a way of modelling flows over an inline structure which traverses more than one cross sections, in HEC-RAS?
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Inline structure over multiple cross sections

cameron
Why would there be multiple cross-sections across the inline structure? Do you have cross-section spacing very small?
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Inline structure over multiple cross sections

Nayyar Minhaj Asif
In reply to this post by Danny
as per the lietrature, for modeling an inline structure, only 4 cross sections are required. The cross section that is immediately upstream and downstream of the inline structure shall form the geometry for the inline.

I dont think that an inline can be traversed over multiple cross sections. it is not possbile i think.
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Inline structure over multiple cross sections

cameron
That would depend if they are using the inline structure feature in HEC-RAS or if they are modeling the inline structure as only cross-sections instead of the inline structure option.  
Loading...